Shed Permit Cost in Frisco, TX (2026)
Residential shed and accessory-building permit fees for the City of Frisco, Texas (Collin and Denton Counties, DFW Metroplex), pulled directly from the Permit, Inspection and Miscellaneous Consolidated Fee Schedule, updated October 7, 2025. Frisco splits sheds into two lines: a modular (prefab) shed is a flat $50.00, while a conventionally framed shed (built on site) is $75 plus $0.59 per gross square foot (or fraction), capped at $550. Shed electrical, when pulled as its own permit, is not included. Texas has no statewide permit levy, and Frisco adds no percentage surcharge on the shed line.
This guide covers: The City of Frisco residential shed permit fees as printed in the Consolidated Fee Schedule (updated October 7, 2025). A modular (prefabricated) shed is a flat $50.00. A conventionally framed shed built on site is $75 plus $0.59 for each gross square foot (or fraction), to a maximum of $550. Both figures are exact from the schedule.
Which line applies: a delivered prefab/modular shed uses the flat $50 line; a shed framed and built on site uses the $75 + $0.59/sq ft formula. If your shed is unusually large or on a permanent foundation, Building Inspections determines whether it is a shed or a larger accessory structure. This guide does not assume a reclassification.
Shed electrical is separate: the shed figure is the building permit for the structure. If you run power to the shed on its own electrical permit, Frisco prices standalone electrical separately - a $50 issuance fee plus $0.03 per gross square foot and $4.75 per residential appliance - not folded into the shed fee.
This guide does NOT cover: shed material or kit cost, a detached garage or larger accessory structure, a concrete slab poured as its own permit, impact and development fees, zoning setback approvals, or HOA rules. These are separate and are not included in the shed permit figure.
A modular (prefab) residential shed permit in Frisco, TX is a flat $50.00. A conventionally framed shed built on site is $75 plus $0.59 per gross square foot, capped at $550 - so a 120 sq ft framed shed is $145.80. Shed electrical, when pulled separately, adds a $50 issuance fee plus components and is not included. No plan-review percentage attaches to the shed line. Texas adds no state levy. Figures are from the Consolidated Fee Schedule, updated October 7, 2025.
- Frisco prices sheds by type: a modular (prefab) shed is a flat $50.00, while a conventionally framed shed built on site is $75 plus $0.59 per gross square foot, capped at $550.
- The modular $50 line is flat at any size; the framed line scales with square footage and reaches the $550 cap at roughly 806 gross square feet.
- A 120 sq ft framed shed is $145.80 ($75 + 120 × $0.59); a 200 sq ft framed shed is $193.00. A delivered prefab shed of any size is $50.00.
- Shed electrical is not bundled into the shed permit. Frisco prices standalone electrical as its own permit - a $50 issuance fee plus $0.03 per gross square foot and $4.75 per residential appliance - so running power to a shed on its own is a separate line.
- Texas has no statewide percentage permit levy and Frisco adds no city surcharge on the shed line. Among verified Texas cities, Frisco's $50 modular shed matches Carrollton's $50 and sits between Grand Prairie's tiered accessory fees and New Braunfels's $50-$75 lines.
- The figures come from the Frisco Consolidated Fee Schedule (updated October 7, 2025), re-confirmed against the live PDF on September 2, 2026 - a current schedule. Confirm whether your shed is modular or framed, and any setback rules, with the Building Inspections Division before budgeting.
Frisco Shed Permit Fee Structure
The shed permit depends on construction type: a flat line for a modular shed, a base-plus-per-square-foot line for a framed shed, capped at a maximum. Shed electrical, when pulled separately, is its own permit. There is no valuation calculation on the shed line and no statewide levy.
| Item | Fee | How It Is Calculated |
|---|---|---|
| Modular (prefab) shed | $50.00 | Flat line - same at any size for a delivered prefab shed. |
| Conventionally framed shed | $75 + $0.59/sq ft | Base $75 plus $0.59 for each gross square foot (or fraction), to a $550 maximum. |
| Maximum framed-shed fee (cap) | $550.00 | The per-square-foot line stops at $550 - reached at roughly 806 gross sq ft. |
| Shed electrical (if pulled separately) | $50 issuance + $0.03/gsf + $4.75/appliance | Standalone electrical permit - a separate permit, not part of the shed line. |
| Plan review on the shed line | None | Frisco bundles residential plan review into the permit fee. |
| State / city percentage levy | None | Texas has no statewide permit levy; Frisco adds no percentage surcharge on the shed line. |
Source: City of Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule, updated October 7, 2025. The shed-electrical row reports the separate standalone electrical permit fee, not an addition to the shed line - confirm whether a separate electrical permit is required with the Building Inspections Division.
Worked Examples - Real Shed Projects in Frisco
A modular shed is a flat fee; a framed shed scales with gross square footage until it hits the $550 cap. Figures are from the Consolidated Fee Schedule, updated October 7, 2025.
A homeowner buys a prefabricated shed delivered and set on a pad.
- Modular shed permit: $50.00 (flat)
- Texas state levy: $0.00 (none)
- Shed permit: $50.00
The $50.00 modular line is flat regardless of the shed's footprint.
A homeowner frames and builds a 120 gross square foot storage shed on site.
- Base framed-shed permit: $75.00
- Per-square-foot: 120 × $0.59 = $70.80
- Shed permit: $145.80 (before any electrical)
A 200 sq ft framed shed would be $75 + $118 = $193.00. Well under the $550 cap.
A 150 sq ft framed shed wired for lights and an outlet on a separate electrical permit.
- Framed-shed permit: $75 + (150 × $0.59 = $88.50) = $163.50
- Standalone electrical permit (issuance): $50.00 + components
- Shed + electrical (illustrative): $213.50+
The $50 electrical issuance fee is exact; the per-square-foot and per-appliance components depend on the work, so the combined figure is labeled illustrative. Confirm whether your shed needs a separate electrical permit with Building Inspections.
When This Estimate May Not Apply
The shed figures cover the shed permit itself on Frisco's Consolidated Fee Schedule. Route your project to the Frisco Building Inspections Division before relying on these figures if any of the following applies:
- Your shed is framed, not modular. A built-on-site framed shed uses $75 + $0.59/sq ft (max $550), not the flat $50 modular line. Building Inspections decides which line applies.
- Shed electrical is permitted separately. Running power to a shed on its own permit is a standalone electrical permit - a $50 issuance fee plus $0.03/gsf and $4.75 per appliance - not included in the shed fee.
- The structure is larger than a shed. A detached garage or larger accessory building may be permitted differently. A very large or foundation-set structure can reclassify.
- Zoning setbacks or an HOA apply. Accessory-structure setback rules and HOA approvals are separate from the building permit and are not part of the shed fee.
- The schedule is updated. These figures are exact from the Consolidated Fee Schedule updated October 7, 2025 and confirmed live September 2, 2026. Frisco references a broader citywide fee schedule that can change; confirm the current amount before filing.
Shed electrical, a slab poured separately, larger accessory structures, setbacks, and impact/utility fees are excluded from the shed permit figure on this page, and the page-standard disclaimer applies - always verify with the Frisco Building Inspections Division before budgeting.
Frisco Shed Permit Cost vs Other Verified Texas Cities
Texas cities price sheds and accessory buildings on different models - flat lines, size tiers, and per-square-foot lines. The table below compares Frisco's shed permits with other verified Texas cities. Scope differs, so each figure notes its basis.
| City | Shed Fee Basis | Typical Shed Permit |
|---|---|---|
| Frisco, TX | Modular flat / framed $75 + $0.59/sq ft | $50 - $193 |
| Carrollton, TX | Flat storage-shed line | $50.00 |
| Grand Prairie, TX | Tiered by size (up to 100 SF $20; 100-400 SF $100) | $20 - $100 |
| New Braunfels, TX | Flat: $75 built-on-site / $50 pre-built | $50 - $75 |
| Arlington, TX | Flat accessory/storage line | $25.00 |
Scope note: Frisco's $50 modular line matches Carrollton, while its framed line ($75 + $0.59/sq ft) scales with size. Grand Prairie tiers by footprint, New Braunfels splits pre-built vs built-on-site, and Arlington uses a low flat accessory line. Compare the fee basis, not just the headline number, and confirm current figures with each department.
See Frisco's full residential fee schedule, or compare another verified Texas city.
Frequently Asked Questions
Who to Contact
| Department | City of Frisco - Development Services, Building Inspections Division (972-292-5301) |
| Location | George A. Purefoy Municipal Center, 6101 Frisco Square Blvd, 3rd Floor, Frisco, TX 75034 (Collin & Denton Counties) |
| Fee schedule | Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule (updated 10-7-2025) |
Sources
-
City of Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule (Updated 10-7-2025) City of Frisco official fee schedule PDF (.gov). Primary source for the flat $50.00 modular-shed line, the $75 + $0.59/sq ft conventionally-framed-shed line (max $550), and the standalone electrical permit fee. Re-downloaded and re-read September 2, 2026 exact - updated October 7, 2025
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified September 2026.