Fence Permit Cost in Georgetown, TX (2026)
Residential fence permit fees for the City of Georgetown, Texas (Williamson County seat, about 26 miles north of Austin on the I-35 corridor), pulled directly from the city's Building Inspections Construction Fee Schedule. Georgetown prices a fence permit as a flat $50.00 permit fee plus a $10.00 technology fee - about $60.00 all-in, the same at any length, height, or material, because it is a single flat line. Texas has no statewide levy. One source-currency note up front: the fee schedule is marked "Revised 10.2.23" (effective October 1, 2023, more than 24 months old), so confirm the current fence fee with Building Inspections at 512-930-2550 before budgeting.
This guide covers: The City of Georgetown residential fence building permit fee as published on the Building Inspections Construction Fee Schedule - a flat $50.00 permit fee plus the $10.00 technology fee that Georgetown adds to miscellaneous residential and trade permits, for about $60.00 all-in. The fee is the same regardless of fence length, height, or material, because it is a single flat line.
Important note on source currency: the Georgetown Construction Fee Schedule footer reads "Revised 10.2.23" - effective October 1, 2023, which is more than 24 months old. It is the current published schedule linked from the city's Development Services pages and no newer revision was located, but confirm the current fence fee with Building Inspections at 512-930-2550 before relying on it for a load-bearing budget.
This guide does NOT cover: fence construction/material cost, retaining walls that hold back earth (engineered walls follow a different path), electrified or pool-barrier requirements, zoning height and corner-visibility rules, HOA or deed-restriction approvals, or survey/plat costs. These are separate and are not included in the flat fence permit fee.
A residential fence permit in Georgetown, TX is a flat $50.00 permit fee plus a $10.00 technology fee - about $60.00 all-in, the same at any length, height, or material, because it is a single flat line. Texas adds no state levy. These figures come from the Building Inspections Construction Fee Schedule marked "Revised 10.2.23" (effective October 1, 2023, more than 24 months old), so confirm current rates with Building Inspections at 512-930-2550 before filing.
- Georgetown charges a flat $50.00 fence permit fee plus a $10.00 technology fee - about $60.00 all-in - the same regardless of fence length, height, or material, because it is a single flat line, not a per-foot or valuation-based fee.
- The $10.00 technology fee is Georgetown's standard add-on to miscellaneous residential and standalone trade permits (new ground-up homes pay a larger $25.00 technology fee instead).
- Source-currency caveat: the Construction Fee Schedule is marked "Revised 10.2.23" (effective October 1, 2023, more than 24 months old). It is the current published schedule, but confirm the fence fee with Building Inspections at 512-930-2550 before filing.
- A retaining wall, an electrified fence, or a required pool-barrier fence can carry different or additional requirements; the flat $60 all-in figure is for an ordinary residential fence.
- Among verified Texas cities, Georgetown's ~$60 all-in fence permit sits mid-pack - above Arlington's $25 and Denton's $50, and below Plano's $75 and San Marcos's $94 all-in.
- Texas has no statewide percentage permit levy - unlike Virginia's 2% USBC add-on - so the flat figure plus the $10 tech fee is the whole fence permit.
Georgetown Fence Permit Fee Structure
The residential fence permit is a flat fee, priced the same regardless of length, height, or material, with a flat technology fee added. There is no statewide levy. All figures are from the Georgetown Building Inspections Construction Fee Schedule marked "Revised 10.2.23" (effective October 1, 2023) - confirm current rates before relying on them.
| Item | Fee | How It Is Calculated |
|---|---|---|
| Fence permit fee | $50.00 | Flat line - same at any length, height, or material. |
| Technology fee | $10.00 | Flat add-on to miscellaneous residential and standalone trade permits. |
| Typical all-in fence permit | $60.00 | $50.00 permit + $10.00 technology fee. |
| Standalone trade permit (if involved) | $50.00 + $10.00 | Each electrical/mechanical/plumbing permit, if the fence work triggers one (rare for a fence). |
| Plan review (residential fence) | None | No plan-review fee applies to a flat miscellaneous residential permit. |
| State percentage levy | None | Texas has no statewide permit levy. |
Source: City of Georgetown Building Inspections Construction Fee Schedule (Revised 10.2.23, effective October 1, 2023). The $50.00 fence permit and $10.00 technology fee are exact on the schedule, but the schedule is more than 24 months old - confirm the current fence fee with Building Inspections at 512-930-2550 before filing.
Worked Examples - Real Fence Projects in Georgetown
Because the fence permit is a flat fee, the permit cost does not change with fence length or height. The examples below use the schedule's published amounts; confirm currency before budgeting.
A homeowner installs a 6-foot cedar privacy fence around a typical backyard.
- Fence permit fee: $50.00
- Technology fee: $10.00
- Total permit cost: $60.00
The same $60 all-in applies whether the fence runs 60 feet or 260 feet - it is a flat line, not a per-foot fee.
A homeowner fences a large corner lot with several hundred feet of wrought-iron and masonry-column fencing.
- Fence permit fee: $50.00
- Technology fee: $10.00
- Total permit cost: $60.00
Georgetown's flat fence line does not scale with length or material, so the permit is still $60 all-in. Corner-visibility and height limits are zoning matters handled separately.
A homeowner adds a fence on top of a slope that also needs an earth-retaining wall.
- Fence permit (flat + tech): $60.00
- Retaining wall: routed separately
- Fence permit only: $60.00
An earth-retaining wall is not the same as a fence and follows a different path (engineered walls in particular). Ask Building Inspections how a combined project is permitted before you file.
When This Estimate May Not Apply
The flat $50 permit + $10 technology fee figure comes from Georgetown's Construction Fee Schedule. Route your project to Building Inspections before relying on this figure if any of the following applies:
- The rates may have changed. The schedule is marked "Revised 10.2.23" (effective October 1, 2023, more than 24 months old) - confirm the current fence fee at 512-930-2550 before budgeting.
- Your project is a retaining wall, not a fence. An earth-retaining wall follows a different permit path, especially if engineered.
- The fence is a required pool-safety barrier. Pool-barrier fencing is tied to the pool permit and enclosure code, handled separately.
- The fence is electrified or gated with powered hardware. Powered gates or electric fencing can trigger a separate electrical trade permit ($50 + $10 tech).
- Zoning height or corner-visibility rules apply. Fence height limits, corner clip lines, and setbacks are zoning matters separate from the flat permit fee.
- HOA or deed-restriction rules apply. Material, height, and placement approvals are handled separately from the city permit.
The source-currency caveat, retaining walls, pool-barrier requirements, electrified fencing, zoning rules, and HOA approvals are all excluded from or may change the flat fence permit figure on this page, and the page-standard disclaimer applies - always verify with the Georgetown Building Inspections office before budgeting.
Georgetown Fence Permit Cost vs Other Verified Texas Cities
Texas cities mostly price residential fence permits as a flat building-permit line, but the amounts range widely and some add a per-permit technology fee. The table below compares Georgetown's flat fence permit (with its $10 tech fee) against other verified Texas cities. Each is the fence building permit only.
| City | Fence Fee Basis | All-In Fence Permit |
|---|---|---|
| Arlington, TX | Flat line | $25.00 |
| Denton, TX | Flat line | $44.00 |
| Georgetown, TX | Flat + $10 tech | $60.00 |
| Killeen, TX | $0.25/LF ($70 min) | $70.00+ |
| Plano, TX | Flat line | $75.00 |
| San Marcos, TX | Flat + $15 tech | $94.00 |
Scope note: Georgetown's ~$60 all-in fence permit sits mid-pack among verified Texas cities - above Arlington's $25 and Denton's $50, and below Killeen's $70+ per-foot floor, Plano's $75, and San Marcos's $94 all-in. Georgetown's figure is from a schedule effective October 1, 2023 - confirm currency.
See Georgetown's full residential fee schedule, or compare another Georgetown project type.
Frequently Asked Questions
Who to Contact
| Department | City of Georgetown - Building Inspections (Development Services) |
| Phone | 512-930-2550 |
| Location | 1 Industrial Ave., Georgetown, TX 78626 (Williamson County, ~26 miles north of Austin) |
| Fee schedule | Georgetown Building Inspections Construction Fee Schedule (Rev 10.2.23) |
Sources
-
City of Georgetown - Building Inspections Construction Fee Schedule (Revised 10.2.23) City of Georgetown official fee schedule (extracted July 2, 2026). Primary source for the $50.00 fence permit, the $10.00 technology fee, and the no-plan-review treatment of miscellaneous residential permits. Marked "Revised 10.2.23" (effective October 1, 2023). verify currency
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified September 2026.