Deck Permit Cost in Georgetown, TX (2026)
Residential deck permit fees for the City of Georgetown, Texas, pulled directly from the Building Inspections Construction Fee Schedule (Revised October 2, 2023). Georgetown prices a wood deck under its miscellaneous residential line: a $60.00 application fee plus $0.50 per square foot plus a $10.00 technology fee. For a typical 200 sq ft deck that is $170.00 all-in. Texas has no statewide permit levy and Georgetown adds no city percentage surcharge. Unlike a flat-fee city, Georgetown's deck permit scales with size, so a bigger deck costs more.
This guide covers: City of Georgetown, Texas (Williamson County) residential deck permit fees as published on the Building Inspections Construction Fee Schedule, Revised October 2, 2023. A wood deck is one of the projects explicitly listed under the miscellaneous residential category - alongside patios, patio covers, pergolas, and accessory buildings - which is priced as a $60.00 application fee plus $0.50 per square foot plus a $10.00 technology fee. There is no separate plan-review fee on this line for a standard residential deck.
Deck permits scale with square footage: because Georgetown charges $0.50 per square foot on top of the fixed $70.00 ($60 app + $10 tech), a bigger deck costs more. A 200 sq ft deck is $170.00; a 400 sq ft deck is $270.00. This is the opposite of a flat-fee city like Killeen ($80.00 at any size) or Round Rock ($125.00 flat uncovered).
This guide does NOT cover: Deck contractor labor and material costs. HOA architectural approvals. Added trade permits - if your deck adds new electrical (for lighting or a receptacle), each trade permit is $50.00 + $10.00 technology fee, and Georgetown's miscellaneous residential line does NOT bundle trades. Whether your specific deck triggers structural or attachment review - route those questions to Building Inspections at (512) 930-2550 before filing.
Source-age note: the fee schedule is dated Revised 10.2.23 (effective October 1, 2023) - over two years old at the time of extraction. It is the current published Construction Fee Schedule linked from Development Services, and no newer revision was located, but confirm the per-square-foot rate with Building Inspections at (512) 930-2550 before budgeting.
A Georgetown, TX deck permit is priced under the miscellaneous residential line: a flat $60.00 application fee plus $0.50 per square foot plus a $10.00 technology fee. A typical 200 sq ft deck is $170.00 all-in, and a 400 sq ft deck is $270.00. Texas adds no state levy. Added electrical or other trade permits are $50.00 + $10.00 each on top. Figures are from the Construction Fee Schedule revised October 2, 2023 - over two years old, so confirm at (512) 930-2550.
- A wood deck is one of the projects explicitly named under Georgetown's miscellaneous residential line, priced at $60.00 application + $0.50 per square foot + $10.00 technology fee. A 200 sq ft deck is $170.00 all-in.
- The fee scales with size: 100 sq ft is $120.00, 200 sq ft is $170.00, 300 sq ft is $220.00, and 400 sq ft is $270.00. Every additional square foot adds 50 cents.
- There is no separate plan-review fee on the deck line, and no per-value calculation - only the fixed $70.00 ($60 app + $10 tech) plus $0.50 per square foot.
- Georgetown's miscellaneous residential category does NOT bundle trade permits. If the deck adds new electrical work (deck lighting, a receptacle, a hot-tub circuit), that is a separate $50.00 permit plus a $10.00 technology fee - $60.00 - on top of the deck fee.
- Texas has no statewide percentage permit levy - unlike Virginia's 2% USBC add-on - and Georgetown adds no city surcharge on the deck line.
- For context: Georgetown's $170.00 (200 sq ft) deck is more than Killeen's $80.00 flat uncovered deck, and lands between it and Round Rock's $125.00 flat uncovered deck as the deck gets larger. Small decks (about 110 sq ft or less) are cheaper in Georgetown than in Round Rock; bigger decks are cheaper in Round Rock's flat structure.
- The figures come from the Construction Fee Schedule revised October 2, 2023 - the current published version, but over two years old. Confirm with Building Inspections at (512) 930-2550 before filing.
Georgetown Deck Permit Fee Structure
Georgetown prices a deck under the miscellaneous residential line: a fixed application fee, a per-square-foot permit fee, and a small technology fee. The only variables are the deck's square footage and whether the project adds a separate trade permit.
| Item | Permit Fee | How It Is Calculated |
|---|---|---|
| Application fee | $60.00 | Flat, per miscellaneous residential application. |
| Permit fee | $0.50 / sq ft | Multiplied by the deck's square footage. |
| Technology fee | $10.00 | Flat, per application. |
| 200 sq ft deck (all-in) | $170.00 | $60 + (200 x $0.50) + $10. |
| Added trade permit (e.g. deck electrical) | $50.00 + $10.00 = $60.00 | Each new E/M/P trade permit; miscellaneous residential does not bundle trades. |
| Plan review (standard residential deck) | Not charged | No separate plan-review fee on the miscellaneous residential line. |
| State / city percentage levy | None | Texas has no statewide permit levy; Georgetown adds no city surcharge. |
Source: City of Georgetown Building Inspections Construction Fee Schedule, Revised October 2, 2023 (effective October 1, 2023). Confirm the per-square-foot rate with Building Inspections at (512) 930-2550 - the schedule is over two years old.
Worked Examples - Real Deck Projects in Georgetown
Because Georgetown's deck line adds $0.50 per square foot on top of a fixed $70.00, the square footage moves the total directly. Every figure below is direct arithmetic from the published schedule.
A homeowner builds a 200 sq ft pressure-treated wood deck off the back door. No roof, no electrical.
- Application fee: $60.00
- Permit fee: 200 sq ft x $0.50 = $100.00
- Technology fee: $10.00
- Texas state levy: $0.00 (none)
- Total all-in deck permit: $170.00
A standard uncovered residential deck carries no separate plan-review fee.
A homeowner builds a large 400 sq ft uncovered deck - double the footprint of Example 1.
- Application fee: $60.00
- Permit fee: 400 sq ft x $0.50 = $200.00
- Technology fee: $10.00
- Total all-in deck permit: $270.00
The $100.00 difference from Example 1 is entirely the extra 200 sq ft at $0.50 each - the fixed $70.00 does not change.
A homeowner builds the same 200 sq ft deck but adds low-voltage-plus-line-voltage deck lighting that needs a standalone electrical permit.
- Deck permit (application + $0.50/sq ft + tech): $170.00
- Standalone electrical permit + tech fee: $60.00 ($50.00 + $10.00)
- Total: $230.00
Miscellaneous residential does not bundle trades, so each added E/M/P trade is a separate $50.00 + $10.00 permit. Whether your lighting needs its own permit is a department call - confirm at (512) 930-2550.
When This Estimate May Not Apply
The $60 + $0.50/sq ft + $10 figure covers the standard residential wood deck on the Revised 10.2.23 schedule. Route your project to Building Inspections at (512) 930-2550 before relying on these figures if any of the following applies:
- The fee schedule has been revised since October 2023. The published schedule is over two years old. It is the current version linked from Development Services, but the city can adopt a new schedule at any time - confirm the $0.50/sq ft rate before budgeting.
- The deck adds new trade work. Miscellaneous residential does not bundle trades. Deck lighting, a receptacle, or a hot-tub circuit each need a standalone electrical permit at $50.00 + $10.00 technology fee.
- The project is really a covered patio, sunroom, or room addition. A patio cover or pergola is still miscellaneous residential ($0.50/sq ft), but enclosing a deck into conditioned space may be treated as a new-construction addition - route the classification to the department.
- Your project is in the extraterritorial jurisdiction (ETJ). Standalone trade permits jump to $200.00 + $10.00 in the ETJ versus $50.00 + $10.00 inside the city limits.
- An inspection requires a re-inspection. Re-inspection fees escalate ($50 first, $100 second, $150 third) on top of the permit fee.
Impact and tap fees do not apply to a deck, but the page-standard disclaimer still applies - always verify with Georgetown Building Inspections before budgeting.
Georgetown Deck Permit Cost vs Other Verified Jurisdictions
Georgetown is one of the few verified Central Texas cities that prices a deck by the square foot rather than as a flat fee. Read the basis column carefully - a per-square-foot deck can end up cheaper or more expensive than a flat-fee deck depending on how big it is, and the source vintages differ.
| Jurisdiction | Deck Fee Basis | Typical Deck Permit |
|---|---|---|
| Georgetown, TX - wood deck | $60 app + $0.50/sq ft + $10 tech (scales with size) | $170.00 (200 sq ft) |
| Round Rock, TX - uncovered deck | $125 flat (any size, no elec/plumbing) | $125.00 |
| Killeen, TX - uncovered deck | $70 flat + $10 tech (any size) | $80.00 |
| Frederick County, MD | $157 all-in (≤500 sq ft, eff. July 1, 2026) | $157.00 |
| Dallas, TX | Decks not itemized on fee schedule | Not directly comparable |
Because Georgetown scales with size, the ranking depends on the deck: a small 100 sq ft deck is $120.00 in Georgetown - less than Round Rock's $125.00 flat - but a 200 sq ft deck ($170.00) costs more than Round Rock's flat fee. Killeen's $80.00 flat is cheapest for any real deck. Note the vintage differences: Georgetown's figure is from a schedule revised October 2023 (over two years old), Round Rock's flat menu comes from undated department pages, and Frederick County, MD's $157 all-in deck takes effect July 1, 2026. Dallas does not itemize decks, so no single Dallas figure is directly comparable.
See how Georgetown compares head-to-head against its Williamson County neighbor Round Rock.
Frequently Asked Questions
Who to Contact
| Department | City of Georgetown - Building Inspections (Development Services) |
| Phone | (512) 930-2550 |
| Address | 300-1 Industrial Ave., Georgetown, TX 78626 |
| permits@georgetowntexas.gov | |
| Hours | Monday to Friday, 8 a.m. to 5 p.m. |
| Online permit portal | Building Permits and Inspections (My Government Online) |
Sources
-
City of Georgetown - Building Inspections Construction Fee Schedule (Rev. 10.2.23) Revised October 2, 2023 (effective October 1, 2023) - Georgetown, TX - Primary source for the $60.00 application fee, the $0.50 per square foot permit fee, the $10.00 technology fee, and the $50.00 + $10.00 standalone trade permit. Over two years old at extraction (July 2, 2026); the current version linked from Development Services. source over 2 years old
-
City of Georgetown - Building Permits and Inspections Retrieved July 2026 - Georgetown, TX - Department contact information (300-1 Industrial Ave., 512-930-2550, permits@georgetowntexas.gov), hours, and the My Government Online permit portal.
Confirm your specific Georgetown deck permit cost or compare against Round Rock.