Driveway Permit Cost in Lubbock, TX (2026)
Driveway and flatwork permit fees for the City of Lubbock, Texas (Lubbock County), pulled directly from the Building Safety Fee Schedule for Fiscal Year October 1, 2025 to September 30, 2026. Lubbock prints a single flat "residential flatwork" line at $75.00 – which covers a driveway, patio, or sidewalk – and that $75.00 is also the citywide minimum permit fee. The figure is exact from the published schedule. Because Lubbock bills the building trade only, there is no per-square-foot scaling on this line and no technology surcharge, and Texas has no statewide permit levy. A driveway approach in the public right-of-way falls under the Engineering Department's separate schedule, not this building line. This schedule is current (the fiscal year in effect), so no source-age caveat applies – still confirm the amount before budgeting.
This guide covers: The City of Lubbock, Texas (Lubbock County) residential flatwork permit line as printed in the Building Safety Fee Schedule – a flat $75.00. That $75.00 is exact from the published schedule, and it is the building permit for residential flatwork, which on the Lubbock schedule covers a driveway, patio, or sidewalk. The $75.00 flatwork fee is the same as the schedule's citywide $75.00 minimum permit fee.
The fee is flat, not per square foot: Lubbock prints a single $75.00 flatwork line, so a wider or longer driveway is still $75.00. This differs from cities such as New Braunfels that charge per square foot for flatwork. On the Lubbock schedule, flatwork simply prices at the flat minimum.
Lubbock bills the building trade only: unlike many Texas cities, Lubbock issues electrical, mechanical, and plumbing as separate permits. A driveway is pure flatwork with no trade component, so the $75.00 building line is the whole permit – there is no separate trade permit to add for a plain concrete driveway.
A right-of-way approach is on a different schedule: the $75.00 is the Building Safety permit for flatwork on your property. Where a driveway ties into the public street, the approach in the right-of-way falls under the city's Engineering Department schedule, which is separate from Building Safety. Confirm whether an Engineering approach permit applies.
This guide does NOT cover: Engineering Department right-of-way approach and driveway-cut fees; drainage and grading review; setback and sight-distance rules; concrete or paving material and labor costs; impact fees; and any additional Lubbock County fees. Retaining walls and swimming pools are not itemized on this Building Safety schedule – do not assume the $75.00 flatwork line covers them.
A driveway or flatwork permit in Lubbock, TX is a flat $75.00 building line on the Building Safety Fee Schedule (FY October 1, 2025 to September 30, 2026) – the exact printed "residential flatwork" figure, which also covers a patio or sidewalk. That $75.00 equals the schedule's citywide $75.00 minimum permit fee. The fee is flat, not per square foot, so a larger driveway is still $75.00. Lubbock bills the building trade only, so a plain concrete driveway has no separate trade permit to add. A driveway approach in the public right-of-way falls under the Engineering Department's separate schedule. Texas adds no state levy and Lubbock adds no technology surcharge, so the $75.00 stands on its own.
- Lubbock, Texas charges a flat $75.00 for a residential flatwork permit on the Building Safety Fee Schedule, and that line covers a driveway, patio, or sidewalk. The $75.00 is the exact printed figure.
- The $75.00 flatwork fee equals the schedule's citywide $75.00 minimum permit fee, so a driveway prices at the floor of the schedule – among the simpler residential permits to budget.
- The fee is flat, not per square foot. A wider or longer driveway is still $75.00, unlike cities that price flatwork per square foot such as New Braunfels ($0.25 per square foot).
- Lubbock bills the building trade only; electrical, mechanical, and plumbing are separate permits. A plain concrete driveway has no trade component, so the $75.00 building line is the whole permit.
- A driveway approach in the public right-of-way falls under the city's Engineering Department schedule, separate from Building Safety. Retaining walls and swimming pools are not itemized on this schedule – do not assume the flatwork line covers them.
- The schedule is the fiscal year in effect (October 1, 2025 to September 30, 2026), so no source-age caution applies. For same-city context, see the Lubbock fence permit guide and the Lubbock solar permit guide.
Lubbock Driveway & Flatwork Fee Structure
The flatwork permit is a single flat line at $75.00 – the exact printed figure, and the same as the citywide minimum permit fee. There is no per-square-foot scaling, no technology surcharge, and no statewide levy. Because Lubbock bills the building trade only, a plain driveway carries no separate trade permit. The table below shows the flatwork line, the minimum-fee relationship, and the right-of-way note, so you can see what is and is not part of the fee. Every printed amount is exactly as it appears on the schedule.
| Item | Fee | How It Is Applied |
|---|---|---|
| Residential flatwork (driveway, patio, sidewalk) | $75.00 flat | Exact printed line. The Building Safety permit for residential flatwork, any size, as listed. |
| Minimum permit fee | $75.00 | Citywide minimum on all permits. The flatwork line equals this floor, so a driveway prices at the minimum. |
| Trade permits (electrical / mechanical / plumbing) | Not added | Separate permits for their own work. A plain concrete driveway has no trade component, so none is added. |
| Right-of-way approach / driveway cut | Separate schedule | Handled by the city's Engineering Department, not Building Safety. Confirm whether an approach permit applies. |
| Technology fee | None | Lubbock's Building Safety schedule adds no technology or automation surcharge. |
| State / city percentage levy | None | Texas has no statewide permit levy. The flat flatwork line carries no percentage add-on. |
Source: City of Lubbock (TX) Building Safety Fee Schedule, Fiscal Year October 1, 2025 to September 30, 2026 (adopted Budget Ordinance No. 2024-O0111). The $75.00 residential flatwork line and the $75.00 minimum permit fee both appear on the city schedule. A right-of-way approach is on the separate Engineering Department schedule; retaining walls and swimming pools are not itemized here. Confirm the current amount with the Department of Building Safety before budgeting.
Worked Examples - Real Driveway & Flatwork Projects in Lubbock
Because the flatwork permit is a flat $75.00, the building line does not change with the size of the slab or with the type of residential flatwork. Each figure below is the exact printed line.
A homeowner replaces a two-car concrete driveway, flatwork only, no right-of-way approach.
- Residential flatwork line: $75.00
- Trade permits: not added (no trade work)
- Total: $75.00
The $75.00 is the exact printed flatwork line, which equals the citywide minimum. An Engineering right-of-way approach permit, if required, is separate.
A wider driveway with extra parking apron on the property – still one flatwork permit.
- Residential flatwork line: $75.00
- Total: $75.00
The fee is flat, not per square foot, so a bigger driveway is still $75.00 – unlike per-square-foot cities where a larger slab costs more.
A concrete patio or a sidewalk replacement on the property – the same flatwork line.
- Residential flatwork line: $75.00
- Total: $75.00
The Lubbock flatwork line covers a driveway, patio, or sidewalk at the same $75.00. A sidewalk in the public right-of-way, however, may fall under the Engineering schedule – confirm which applies.
When This Estimate May Not Apply
The $75.00 covers the residential flatwork building line as printed. Route your project to the Department of Building Safety before relying on this figure if any of the following applies:
- Your driveway ties into the public right-of-way. A driveway approach or driveway cut in the right-of-way falls under the city's Engineering Department schedule, not this $75.00 Building Safety line.
- Your project includes trade work. Lubbock bills electrical, mechanical, and plumbing as separate permits. A plain driveway has none, but adding, say, driveway lighting would bring a separate electrical permit at a $75.00 minimum.
- You are pouring something not itemized here. Retaining walls and swimming pools are not itemized on the Building Safety flatwork schedule. Do not assume the $75.00 flatwork line covers them – confirm the correct permit.
- Your project triggers drainage or grading review. A large paved area may draw drainage or grading review the department handles separately from the flatwork line.
- Setback or sight-distance rules apply. Placement and sight-distance rules can affect where and how large a driveway may be. Those are separate from the $75.00 fee.
- The fiscal-year schedule has been superseded. The fees are the FY October 1, 2025 to September 30, 2026 schedule. Confirm the current amount if you are budgeting near or after the next fiscal year.
Engineering right-of-way approach fees, drainage and grading review, setback and sight-distance rules, and concrete material and labor costs are excluded from the $75.00 flatwork figure on this page, and the page-standard disclaimer applies. Always verify the current amount with the Lubbock Department of Building Safety before budgeting.
Lubbock Driveway Permit Cost vs Other Verified Texas Cities
Texas cities price driveway and flatwork permits differently – some as a flat fee, some per square foot. Scope differs, so each figure below notes its basis, and each department should be verified separately.
| City | Driveway / Flatwork Fee Basis | Residential Driveway Permit |
|---|---|---|
| Lubbock, TX | Flat "residential flatwork" (= minimum) | $75.00 flat |
| Mesquite, TX | Flat driveway line ($75 combined) | $60.00 flat |
| New Braunfels, TX | Per sq ft flatwork line | $0.25 / sq ft (~$190 for 600 sq ft) |
| League City, TX | Flat "Driveway / Flatwork" line | $150.00 flat |
Scope note: Lubbock charges a flat $75.00 "residential flatwork" line that equals its minimum permit fee and covers a driveway, patio, or sidewalk. Mesquite charges a flat $60.00 for a driveway ($75.00 combined). New Braunfels charges $0.25 per square foot, so its cost scales with the slab. League City prints a flat $150.00 driveway line. Compare the basis, not just the number, and confirm current figures with each department.
See Lubbock's full fee schedule, or price other Lubbock projects.
Frequently Asked Questions
Who to Contact
| Department | City of Lubbock, Texas - Department of Building Safety |
| County | Lubbock County, Texas |
| Phone / Address | 806-775-2087 · 1314 Ave K, 1st Floor Annex, Lubbock, TX 79401 |
| Ask them | Whether the $75.00 flatwork amount is still current, whether a separate Engineering right-of-way approach permit is required, and whether drainage or grading review applies |
| Fee schedule | Lubbock Building Safety Fee Schedule (FY 2025-2026) |
Sources
-
City of Lubbock, TX - Building Safety Fee Schedule (FY October 1, 2025 - September 30, 2026) Lubbock, TX (Lubbock County) - official Building Safety Fee Schedule, adopted Budget Ordinance No. 2024-O0111. Primary source for the $75.00 residential flatwork line (driveway, patio, sidewalk) and the $75.00 minimum permit fee. Fiscal year in effect; recorded August 2026.
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified August 2026.