Fence Permit Cost in Richardson, TX (2026)
Residential fence permit fees for the City of Richardson, Texas (Dallas and Collin Counties, DFW Metroplex), pulled directly from the city's Community Services Department Building Permit Fee Schedule (Effective October 1, 2015). Richardson prices a residential fence permit as a flat $30.00 - the same at any fence length, height, or material, because it is a single flat line, not a per-linear-foot or valuation-based fee. A commercial fence is a separate flat $50.00 line. Texas has no statewide permit levy. Important: this schedule is dated October 1, 2015 - over ten years old - so treat the amount as a starting point and confirm it is still current before you file (see the source-age note below).
Source-age caution first: Richardson's Building Permit Fee Schedule is printed "Effective October 1, 2015" - more than ten years old. It is still the fee schedule the city publishes at its official document URL, but a decade-old schedule is more likely than most to have been amended. Every figure on this page should be treated as the 2015 amount and confirmed current with Richardson Building Inspection (972-744-4164) before you budget or file.
This guide covers: The City of Richardson residential fence permit fee as printed in that schedule - a flat $30.00 residential fence permit. That figure is exact from the 2015 schedule and is the same whether the fence is short or runs the full property line, because it is a single flat line rather than a per-linear-foot fee. A commercial fence is a separate flat $50.00 line.
This guide does NOT cover: fence construction cost, a retaining wall (permitted separately), a pool safety barrier's compliance review, engineered or masonry walls that may be treated differently, HOA approvals, or zoning/setback determinations. These are separate and are not included in the $30.00.
A residential fence permit in Richardson, TX is a flat $30.00 - the same at any fence length, height, or material, because it is a flat line rather than a per-linear-foot fee. A commercial fence is a separate flat $50.00 line. Texas adds no state levy. This figure comes from the Community Services Department Building Permit Fee Schedule effective October 1, 2015 - over ten years old, so confirm the amount is still current with Richardson Building Inspection (972-744-4164) before filing.
- Richardson charges a flat $30.00 for a residential fence permit - the same fee regardless of fence length, height, or material, because it is a single flat line, not a per-linear-foot or valuation-based schedule.
- A commercial fence is a separate flat $50.00 line - so the residential rate is the one to use for a home fence.
- The schedule is dated October 1, 2015 - over ten years old. This is the most important caveat on the page: confirm the current amount with Richardson Building Inspection (972-744-4164) before budgeting, because a decade-old schedule is more likely to have been amended.
- A retaining wall is not a fence line - it is permitted separately. If your project combines a fence with a retaining wall, expect two different lines.
- Texas has no statewide percentage permit levy - unlike Virginia's 2% USBC add-on - and Richardson adds no city percentage surcharge on the fence line. Among verified Texas cities, Richardson's $30 is near Grand Prairie's $25 and Temple's $35, and below Longview's $55.
- The figure comes from the Richardson Community Services Department Building Permit Fee Schedule (Effective October 1, 2015). Verify before relying on it.
Richardson Fence Permit Fee Structure
The fence permit is a single flat line, priced the same regardless of fence length, height, or material. Residential and commercial fences are separate flat lines. There is no per-linear-foot or valuation calculation on the fence line and no statewide levy. All figures below are from the 2015 schedule - confirm currency before filing.
| Item | Fee | How It Is Calculated |
|---|---|---|
| Residential fence permit | $30.00 | Flat "fence (residential)" line - same at any length, height, or material. |
| Commercial fence permit | $50.00 | Separate flat line for a commercial fence - not the rate for a home fence. |
| Retaining wall (if part of the project) | Separate | A retaining wall is permitted separately from a fence - not part of the $30.00. |
| Plan review percentage on a flat fence line | None | No plan-review percentage is printed against the flat fence line. |
| State / city percentage levy | None | Texas has no statewide permit levy; Richardson adds no percentage surcharge on the fence line. |
Source: City of Richardson Community Services Department Building Permit Fee Schedule (Effective October 1, 2015). Because this schedule is over ten years old, confirm the current $30.00 residential fence amount with Building Inspection before relying on it.
Worked Examples - Real Fence Projects in Richardson
Because the fence permit is a flat fee, the permit cost does not change with fence length. The examples below use the 2015 schedule amount - confirm it is current before you budget.
A homeowner replaces 150 linear feet of six-foot wood fence.
- Residential fence permit: $30.00
- Texas state levy: $0.00 (none)
- Fence permit: $30.00
The same $30.00 applies whether the fence is 40 feet or 300 feet - it is a flat line, not per-linear-foot. Confirm the amount is current (2015 schedule).
A corner-lot homeowner fences the full perimeter - much more material, same flat permit.
- Residential fence permit: $30.00
- Fence permit: $30.00
Richardson does not scale the fence permit by length, so a large perimeter fence is the same $30.00 as a short run - unlike cities that charge per linear foot.
A sloped lot needs a low retaining wall behind the new fence - two separate permits.
- Residential fence permit: $30.00
- Retaining wall permit: Separate line - confirm
- Fence line: $30.00 + retaining wall (separate)
A retaining wall is not part of the fence permit. This guide does not state a retaining-wall fee - confirm that line with Building Inspection.
When This Estimate May Not Apply
The flat $30.00 covers the residential fence permit itself on Richardson's 2015 schedule. Route your project to the Richardson Building Inspection division before relying on this figure if any of the following applies:
- The schedule has changed since October 2015. This is the biggest caveat: the schedule is over ten years old. A decade-old fee is more likely to have been amended - confirm the current $30.00 residential fence amount with Building Inspection (972-744-4164) before budgeting.
- The fence is commercial. A commercial fence is a separate flat $50.00 line, not the $30.00 residential rate.
- The project includes a retaining wall. A retaining wall is permitted separately - expect a second line beyond the $30.00 fence permit.
- The fence is an engineered or masonry wall. A tall masonry or engineered wall may be reviewed differently than a standard residential fence - a department determination.
- The fence is a pool safety barrier. Texas requires a compliant barrier around a residential pool; whether that is permitted under the fence line or with the pool permit is a determination for Building Inspection.
- Zoning, setback, or HOA rules apply. Corner-lot sight-line rules, height limits, and HOA approvals are handled separately from the flat permit fee and can affect approval.
The 2015 source age, a commercial fence, a retaining wall, engineered/masonry walls, a pool barrier, and zoning/HOA rules are all excluded from the $30.00 residential fence permit on this page, and the page-standard disclaimer applies - always verify with the Richardson Building Inspection division before budgeting.
Richardson Fence Permit Cost vs Other Verified Texas Cities
Texas cities price fence permits on different models - flat permits, per-linear-foot fees, and value-based fees. The table below compares Richardson's flat residential fence permit with other verified Texas cities. Scope differs, so each figure notes its basis.
| City | Fence Fee Basis | Residential Fence Permit |
|---|---|---|
| Grand Prairie, TX | Flat residential-area line | $25.00 |
| Richardson, TX | Flat line (2015 schedule) | $30.00 |
| Temple, TX | Flat line | $35.00 |
| Longview, TX | Flat line | $55.00 |
| El Paso, TX | Flat line | $110.00 |
Scope note: Richardson's $30.00 is a flat residential fence line from a 2015 schedule - among the lowest verified in Texas, just above Grand Prairie's $25 and below Temple's $35, Longview's $55, and El Paso's $110. Because Richardson's schedule is a decade old, confirm the current figure before comparing. All are flat lines that do not scale with fence length.
See Richardson's full residential fee schedule, or compare another verified Texas city.
Frequently Asked Questions
Who to Contact
| Department | City of Richardson - Community Services Department (Building Inspection) |
| Phone | 972-744-4164 |
| Location | City of Richardson, Dallas & Collin Counties, Texas (DFW Metroplex) |
| Fee schedule | Richardson Building Permit Fee Schedule (Effective October 1, 2015) |
Sources
-
City of Richardson Community Services Department Building Permit Fee Schedule (Effective October 1, 2015) City of Richardson official Building Permit Fee Schedule (PDF). Primary source for the $30.00 residential fence permit and the $50.00 commercial fence line. Read July 4, 2026 exact on the 2015 schedule - over 10 years old, confirm currency
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified July 2026.