Skip to main content

Fence Permit Cost in Grand Prairie, TX (2026)

Residential fence permit fees for the City of Grand Prairie, Texas (Dallas and Tarrant Counties, DFW Metroplex), pulled directly from the city's Unified Development Code Article 22 - Fee Schedule (Ordinance No. 11756-2025), effective September 2, 2025. Grand Prairie prices a fence permit in a residential area as a flat $25.00 - the same at any fence length, height, or material, because it is a single flat line, not a per-foot or valuation-based fee. Subdivision screening fences and commercial fences are priced differently (1% of value). Texas has no statewide permit levy, and Grand Prairie adds no percentage surcharge on the residential fence line.

Residential Fence Permit
$25.00 flat
Fee Basis
Flat - not per-foot
Subdivision / Commercial Fence
1% of value ($50 min commercial)
Height / Length Tiers
None on the residential line
State / City Percentage Levy
None (Texas has no state levy)
Fee Status
Exact - effective September 2, 2025
What This Guide Covers - and What It Does Not

This guide covers: The City of Grand Prairie residential fence permit fee as printed in the Unified Development Code Article 22 - Fee Schedule (Ordinance 11756-2025), effective September 2, 2025 - a flat $25.00 "fence permit in a residential area" line. That figure is exact from the code and is the same whether the fence is short or long, wood or metal, because it is a single flat line rather than a per-foot or valuation-based fee.

Screening and commercial fences are different: a subdivision screening fence or a commercial fence is priced at 1% of the construction value (commercial minimum $50.00), not the flat $25.00. This guide's $25.00 figure is specifically the standard residential-area fence permit.

On the schedule vintage: Article 22 is the codified UDC fee schedule adopted September 2, 2025 by Ordinance 11756-2025 - a current schedule, well under 24 months old, so no source-age caveat applies. It remains good practice to confirm the current amount with Building Inspections before filing.

This guide does NOT cover: the cost of the fence itself, HOA or deed-restriction approvals, corner-visibility or setback review, a pool safety-barrier determination, retaining-wall permits, or any electrical work for a powered gate. These are separate from the $25.00 residential fence permit.

Key Takeaways
  • Grand Prairie charges a flat $25.00 for a fence permit in a residential area - the same fee regardless of fence length, height, or material, because it is a single flat line, not a per-foot schedule.
  • There are no length or height tiers on the residential fence line - a 40-foot side fence and a full-perimeter privacy fence pay the same $25.00.
  • Subdivision screening fences and commercial fences are priced differently, at 1% of construction value (commercial minimum $50.00) - so this guide's $25.00 is specifically the standard residential-area permit.
  • Texas has no statewide percentage permit levy - unlike Virginia's 2% USBC add-on - and Grand Prairie adds no city percentage surcharge on the residential fence line.
  • Among verified Texas cities, Grand Prairie's $25.00 residential fence permit is one of the lowest - below Pasadena's $40 and Longview's $55, and near Laredo's $46 block-fence line.
  • The figures come from the Grand Prairie UDC Article 22 - Fee Schedule (Ordinance 11756-2025), adopted September 2, 2025 - a current, codified schedule. Confirm current amounts, corner-visibility rules, and HOA requirements before building.

Grand Prairie Fence Permit Fee Structure

The residential fence permit is a single flat line, priced the same regardless of fence length, height, or material. Subdivision screening and commercial fences use a percent-of-value basis. There is no per-foot calculation on the residential line and no statewide levy.

Item Fee How It Is Calculated
Fence permit in a residential area $25.00 Flat "fence permit in a residential area" line in UDC Article 22 - same at any length, height, or material.
Subdivision screening fence 1% of value Screening fences are priced at 1% of construction value, not the flat residential line.
Commercial fence 1% of value ($50 min) Commercial fences are 1% of value with a $50.00 minimum - a different basis from the residential permit.
Height / length tiers None The residential fence line has no height or length tiers; the fee is the same flat $25.00.
State / city percentage levy None Texas has no statewide permit levy; Grand Prairie adds no percentage surcharge on the residential fence line.

Source: City of Grand Prairie Unified Development Code, Article 22 - Fee Schedule (Ordinance 11756-2025), effective September 2, 2025. The subdivision/commercial rows are shown to distinguish the flat residential permit from the percent-of-value basis, not to add a fee to a residential fence.

Worked Examples - Real Fence Projects in Grand Prairie

Because the residential fence permit is a flat fee, the permit cost does not change with fence length, height, or material. Figures are from the UDC Article 22 - Fee Schedule, effective September 2, 2025.

Example 1: Backyard privacy fence

A homeowner replaces a full-perimeter 6-foot wood privacy fence in a residential neighborhood.

  • Residential fence permit: $25.00
  • Texas state levy: $0.00 (none)
  • Fence permit: $25.00

The same $25.00 applies whether the fence is 40 feet or the full lot perimeter - it is a flat line, not per-foot.

Example 2: Length and height do not change the fee

Two homeowners, one building a short side fence and one a tall full-perimeter fence, both residential.

  • Short side fence - permit: $25.00
  • Tall perimeter fence - permit: $25.00
  • Same permit either way: $25.00

The flat residential line has no height or length tiers. Confirm corner-visibility and setback rules with Building Inspections.

Example 3: Where the flat fee does NOT apply

An HOA builds a subdivision screening wall along a thoroughfare - a percent-of-value line, not the residential permit.

  • Standard residential fence: $25.00 flat
  • Subdivision screening fence: 1% of construction value
  • Different basis: $25.00 vs 1% of value

Screening and commercial fences are priced at 1% of value (commercial minimum $50.00), not the flat $25.00. Confirm which line applies to your project with Building Inspections.

When This Estimate May Not Apply

The flat $25.00 covers the standard residential fence permit on Grand Prairie's Article 22 schedule. Route your project to the Grand Prairie Building Inspections division before relying on this figure if any of the following applies:

  • Your fence is a subdivision screening or commercial fence. Those are priced at 1% of construction value (commercial minimum $50.00), not the flat $25.00 residential line.
  • Your fence serves as a pool safety barrier. Texas requires a compliant barrier around a residential pool; whether the barrier is permitted on the fence line or with the pool permit is a department determination.
  • HOA or deed restrictions apply. Many Grand Prairie neighborhoods have HOA fence rules that are separate from the city permit; the $25.00 does not clear HOA approval.
  • Corner-visibility or setback review is needed. Fences near corners, easements, or floodways may need additional review; the flat fee does not include a variance.
  • Work starts without a permit. Article 22 Section 22.2.20 doubles the fee for work commenced before the permit is issued.
  • The schedule is updated. These figures are exact from Article 22 effective September 2, 2025. Fees can be amended by ordinance; confirm the current amount before filing.

Screening/commercial fences, pool-barrier determinations, HOA approval, and corner-visibility review are excluded from the $25.00 residential fence permit on this page, and the page-standard disclaimer applies - always verify with the Grand Prairie Building Inspections division before budgeting.

Grand Prairie Fence Permit Cost vs Other Verified Texas Cities

Texas cities price fence permits on different models - flat residential lines, all-in figures that fold in an application fee, and percent-of-value bases. The table below compares Grand Prairie's flat residential fence permit with other verified Texas cities. Scope differs, so each figure notes its basis.

City Fence Fee Basis Residential Fence Permit
Grand Prairie, TX Flat residential line $25.00
Pasadena, TX Flat line incl. $10 app fee ($50 min tension) $40.00
Laredo, TX Block fence + plan check ($46 + $30) $76.00 all-in
Longview, TX Flat fence line $55.00
Temple, TX Flat fence line $35.00

Scope note: Grand Prairie's $25.00 is a flat residential fence line - one of the lowest verified in Texas. Temple's $35 and Pasadena's $40 are also flat lines; Longview's $55 is a flat line; Laredo folds a $30 plan check onto a $46 block-fence line for $76 all-in. Screening and commercial fences are priced separately in most cities. Confirm current figures and which line applies with each department.

Next Step

See Grand Prairie's full residential fee schedule, or compare another verified Texas city.

Frequently Asked Questions

A residential fence permit is a flat $25.00 - the same at any fence length, height, or material. A subdivision screening fence or commercial fence is priced differently, at 1% of construction value (commercial minimum $50.00). Figures are from the UDC Article 22 - Fee Schedule (Ordinance 11756-2025), effective September 2, 2025. Texas adds no state levy.
No. The residential fence line is a flat $25.00 - the same whether the fence is a short side run or a full-perimeter privacy fence, and there are no height tiers. Only a screening or commercial fence (1% of value) uses a different basis.
Grand Prairie's Article 22 lists a specific "fence permit in a residential area" line at $25.00, which indicates a permit is required for a residential fence. Confirm the exact requirement, corner-visibility rules, and any HOA restrictions for your address with Building Inspections before starting work.
Texas requires a compliant safety barrier around a residential pool. Whether that barrier is permitted on the $25.00 residential fence line or folded into the pool permit is a determination for Building Inspections. This guide does not assume it is the same fee - confirm with the department.
The standard residential-area fence permit is a flat $25.00. A subdivision screening fence (a long masonry or perimeter wall along a thoroughfare) is priced at 1% of construction value, and a commercial fence is 1% of value with a $50.00 minimum. The percent-of-value lines can be much higher than $25.00 on large projects.
Grand Prairie's $25.00 residential fence permit is among the lowest verified in Texas - below Temple's $35, Pasadena's $40, and Longview's $55, and below Laredo's $76 all-in block-fence line. Each city's basis differs, so compare the flat line, not just the number.

Who to Contact

Department City of Grand Prairie - Planning & Development (Building Inspections)
Location City of Grand Prairie, Dallas & Tarrant Counties, Texas (DFW Metroplex)
Fee schedule Grand Prairie UDC Article 22 - Fee Schedule (Ordinance 11756-2025)

Sources

Official Sources - Recorded June 2026
Always verify current fence permit fees directly with the City of Grand Prairie Building Inspections division before budgeting or filing. The figures on this page come from the UDC Article 22 - Fee Schedule (Ordinance 11756-2025), effective September 2, 2025. The $25.00 is the standard residential-area fence permit; subdivision screening and commercial fences use a 1%-of-value basis. Contact Building Inspections to confirm your project's fee, corner-visibility rules, and HOA requirements before submitting an application.
Disclaimer: All fee information on PermitPrice is for informational purposes only and is not an official permit quotation. Actual permit fees are determined by the City of Grand Prairie at the time of application. The $25.00 residential-area fence permit and the 1%-of-value subdivision/commercial fence basis shown are exact from the UDC Article 22 - Fee Schedule, effective September 2, 2025. Fence construction cost, HOA or deed-restriction approvals, corner-visibility or setback review, pool safety-barrier determinations, and powered-gate electrical work are excluded from the fence-permit figure on this page. Verify all fees directly with the department before filing.

Written by: Munib Ur Rehman

Data verified against official fee schedule documents.