Deck Permit Cost in Irving, TX (2026)
Residential deck permit fees for the City of Irving, Texas (Dallas County, Dallas-Fort Worth Metroplex), pulled directly from the city's Schedule of Fees (February 2026 Amendments), Inspections section. Irving charges a deck higher than 30 inches above grade as a flat $65.00 "building single trade" permit (Item 16) - the same at any deck size, because it is a single flat line, not a per-square-foot or valuation-based fee. Texas has no statewide permit levy. This is the schedule's current "Proposed Fee" now in effect (printed effective February 13, 2026), so there is no source-age caution here.
This guide covers: The City of Irving deck permit for a deck higher than 30 inches above grade - a flat $65.00 "building single trade" permit (Item 16) on the current Schedule of Fees. That figure is exact from the "Proposed Fee" column now in effect and is the same whether the deck is small or large, because it is a single flat line. It does not scale per square foot.
This guide does NOT cover: the cost of building the deck, a deck 30 inches or lower above grade (not listed on this line - confirm with Inspections whether it needs a permit), any electrical work such as deck lighting or outlets (a separate single-trade electrical permit at $65.00), a covered deck or patio cover with a roof structure (which can be reviewed as an addition or alteration rather than a flat single-trade deck), or any impact fees. These are separate and are not included in the $65.00.
A deck permit in Irving, TX is a flat $65.00 "building single trade" fee for a deck higher than 30 inches above grade (Item 16) - the same at any deck size, because it is a flat line rather than a per-square-foot fee. Texas adds no state levy. This figure comes from the Schedule of Fees (February 2026 Amendments), Inspections section, effective February 13, 2026. A deck 30 inches or lower is not listed on this line, and adding electrical work is a separate $65.00 single-trade permit - confirm scope with Irving Inspections.
- Irving charges a flat $65.00 "building single trade" permit for a deck higher than 30 inches above grade (Item 16) - the same fee regardless of deck size, because it is a single flat line, not a per-square-foot schedule.
- A deck 30 inches or lower above grade is not listed on this line. Do not assume it is free or that it needs a permit - confirm with Inspections whether a permit is required at that height.
- Adding electrical work (deck lighting, outlets) is a separate single-trade electrical permit at $65.00 (Item 13), not part of the deck line.
- A covered deck or a patio cover with a roof structure can be reviewed as a residential addition or alteration (per-square-foot, with minimums) rather than the flat single-trade deck line - a department call.
- Texas has no statewide percentage permit levy. Among verified Texas cities Irving's $65.00 deck permit sits just above Mesquite's $60 and below League City's $100 and Round Rock's $125.
- The figure comes from Irving's Schedule of Fees (February 2026 Amendments), Inspections section - the current schedule. Verify before relying on it.
Irving Deck Permit Fee Structure
The deck permit is a single flat "building single trade" line (Item 16), priced the same regardless of deck size. There is no per-square-foot or valuation calculation on the flat deck line, and no statewide levy. All figures below are from the current February 2026 schedule "Proposed Fee" column.
| Item | Fee | How It Is Calculated |
|---|---|---|
| Deck over 30 in above grade (Item 16) | $65.00 | Flat "building single trade" line - same at any deck size. |
| Deck 30 in or lower above grade | Not on this line | Not listed as a flat deck permit - confirm with Inspections whether a permit is required. |
| Electrical for the deck (if added) | $65.00 | Separate single-trade electrical permit (Item 13) - not part of the deck line. |
| Covered deck / patio cover with roof | Addition/alteration path | May be reviewed as a residential addition/alteration (per-SF, with minimums) - a department call. |
| State / city percentage levy | None | Texas has no statewide permit levy. |
Source: City of Irving Schedule of Fees (February 2026 Amendments), Inspections section, Item 16. The $65.00 deck permit (over 30 in above grade) is exact on the current "Proposed Fee" column. Electrical work and covered/roofed structures are separate paths and are not part of the flat deck fee.
Worked Examples - Real Deck Projects in Irving
Because the deck permit is a flat fee, the permit cost does not change with deck size. The examples below use the current February 2026 schedule amount.
A homeowner builds a 240 sq ft wood deck 4 feet above grade off the back of the house, with no wiring.
- Deck permit (over 30 in above grade): $65.00
- Texas state levy: $0.00 (none)
- Deck permit: $65.00
The same $65.00 applies whether the deck is 120 sq ft or 400 - it is a flat line, not per-square-foot.
A larger raised deck adds low-voltage lighting and a GFCI outlet, which needs an electrical permit.
- Deck permit (over 30 in above grade): $65.00
- Single-trade electrical permit: $65.00
- Deck + electrical: $130.00
The deck line stays $65.00; the electrical work is a separate single-trade permit at $65.00, so this example is $130.00 total.
A homeowner builds a raised deck with an attached solid roof cover over part of it.
- Flat deck line (if it still applies): $65.00
- Covered/roofed structure: addition/alteration path
- Outcome: department determination
Adding a roof structure can move the project from the flat single-trade deck line to the residential addition/alteration path (per-square-foot, with minimums). This guide does not assume the flat deck line still applies - confirm with Inspections.
When This Estimate May Not Apply
The flat $65.00 covers the deck permit itself (over 30 in above grade) on Irving's current schedule. Route your project to Irving Inspections before relying on this figure if any of the following applies:
- The deck is 30 inches or lower above grade. That height is not listed on the flat single-trade deck line, so this guide does not price it - confirm with Inspections whether a permit is required.
- The deck includes electrical work. Deck lighting or outlets need a separate single-trade electrical permit at $65.00 (Item 13), which is not part of the deck line.
- The deck is covered or roofed. A patio cover or roofed deck can be reviewed as a residential addition or alteration (per-square-foot, with minimums), not the flat single-trade deck line.
- Plumbing or gas is added (outdoor kitchen, gas line). Those are additional single-trade permits ($65.00 each), separate from the deck.
- Work starts before the permit is issued. Irving adds a 100% investigation fee for work begun without a permit (Item 41).
Low decks, electrical, plumbing/gas, covered structures, and the no-permit investigation fee are all excluded from the $65.00 deck permit on this page, and the page-standard disclaimer applies - always verify with Irving Inspections before budgeting.
Irving Deck Permit Cost vs Other Verified Texas Cities
Texas cities price deck permits on different models - flat single-trade fees, flat deck lines, and per-square-foot fees. The table below compares Irving's flat deck permit with other verified Texas cities. Scope differs, so each figure notes its basis.
| City | Deck Fee Basis | Residential Deck Permit |
|---|---|---|
| Mesquite, TX | Flat line | $60.00 |
| Irving, TX | Flat single-trade (over 30 in) | $65.00 |
| Killeen, TX | Flat line | $80.00 |
| League City, TX | Flat line | $100.00 |
| Round Rock, TX | Flat line | $125.00 |
Scope note: Irving's $65.00 is a flat single-trade deck permit for decks over 30 inches above grade - near the low end of verified Texas cities, just above Mesquite's $60 and below Killeen's $80, League City's $100, and Round Rock's $125. All are flat lines that do not scale with deck size; adding electrical or a roof structure changes the path in each city.
See Irving's full residential fee schedule, or compare another verified Texas city.
Frequently Asked Questions
Who to Contact
| Department | City of Irving - Inspections Department (Building Permits) |
| Location | City of Irving, Dallas County, Texas (Dallas-Fort Worth Metroplex) |
| Fee schedule | City of Irving Schedule of Fees - February 2026 Amendments (Inspections section) |
Sources
-
City of Irving Schedule of Fees - February 2026 Amendments (Inspections section) City of Irving official consolidated fee schedule (PDF, irvingtx.gov). Primary source for the $65.00 building single-trade deck permit (Item 16, decks over 30 in above grade), the $65.00 single-trade electrical permit (Item 13), and the 100% investigation fee (Item 41). Inspections section printed effective February 13, 2026; figures are from the "Proposed Fee" column now in effect. current schedule
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified August 2026.