Window & Door Replacement Permit Cost in Waco, TX (2026)
Residential window and door replacement permit fees for the City of Waco, Texas (McLennan County, Central Texas), pulled directly from the city's Development Services - Inspection Services Permit Fee Schedule. Waco prices a Windows/Doors permit as a flat $75.00, and a $15.00 building technology fee attaches to each building permit - $90.00 all-in. Unlike some cities that charge per opening, Waco's line is a single flat fee, so the same $90.00 covers one window or a whole-house replacement. Texas has no statewide permit levy, and Waco adds no percentage surcharge on this line.
This guide covers: The City of Waco (McLennan County) residential window and door replacement permit fee as printed on the Development Services - Inspection Services Permit Fee Schedule - a flat $75.00 "Windows/Doors" line under Repairs & Alterations to existing residential, plus the $15.00 building Technology Fee that attaches to each building permit. That total is $90.00, and it is exact from the schedule. The $75.00 is a single flat line, so it is the same whether you replace one window or every window and door in the house.
On the plan-submittal fee: Waco's schedule prints a $60.00 Non-Refundable Residential Plan Submittal Fee, but that fee is described for new residential construction plan submittal, and the schedule does not state it attaches to a flat replacement line. This guide does not add it to the $90.00; if the department applied it, the total would be $150.00. Confirm with Inspection Services.
On the effective date: Waco's live fee-schedule page prints no explicit effective or adopted date - it is the city's current published schedule (site footer © 2026), codified in the Waco Code of Ordinances Chapter 6. Because no adopted date is shown, confirm the current amount with Inspection Services before treating the total as final.
This guide does NOT cover: the cost of the windows or doors and installation labor, structural changes to an opening (widening a window, cutting in a new door, or header work, which can reclassify the permit to a Repairs & Alterations $200 line), siding or roofing done at the same time (separate $75 and $125 lines), and impact and utility fees. These are separate from the $90.00 windows/doors permit.
A residential window or door replacement permit in Waco, TX is a flat $75.00 Windows/Doors permit, plus a $15.00 building technology fee - $90.00 all-in for any number of openings, because it is a single flat line rather than a per-opening fee. The schedule's $60.00 plan submittal fee is described for new construction and is not stated to attach to a flat replacement, so it is not added here (the total would be $150.00 if it did). Cutting in a new opening or changing structure can reclassify the job to the $200.00 Repairs & Alterations line. Texas adds no state levy. Figures are from the City of Waco Development Services Permit Fee Schedule, which prints no explicit effective date.
- Waco charges a flat $75.00 for a residential Windows/Doors replacement permit - a single flat line, so the same fee covers one opening or a whole-house replacement. It is not priced per window.
- A $15.00 building Technology Fee attaches to each building permit, so the windows/doors all-in is $90.00. Both amounts are exact from the schedule.
- This differs from a per-opening model. In Mesquite, for example, windows and doors are $30 for the first opening plus $30 each thereafter, capped at $100 - so a large job there can cost more than Waco's flat $75, while a single opening costs less.
- The schedule's $60.00 Non-Refundable Residential Plan Submittal Fee is described for new residential construction; the schedule does not state it attaches to a flat replacement. This guide does not add it - the total would be $150.00 if the department applied it. Confirm with Inspection Services.
- Cutting in a new opening, widening a window, or header/structural work can reclassify the job from the flat $75.00 line to the $200.00 "Repairs & Alterations" line - a department determination.
- Texas has no statewide percentage permit levy, and Waco adds no city percentage surcharge on this line. If you also re-side or re-roof, those are separate $75.00 siding and $125.00 roofing lines. Figures come from the City of Waco Development Services Permit Fee Schedule, which prints no explicit adopted date.
Waco Window & Door Permit Fee Structure
The Windows/Doors permit is a single flat line, priced the same regardless of how many openings you replace. A fixed building technology fee attaches to the permit. There is no per-opening or valuation calculation on this line and no statewide levy.
| Item | Fee | How It Is Calculated |
|---|---|---|
| Windows/Doors permit | $75.00 | Flat "Windows/Doors" line under Repairs & Alterations to existing residential - same for any number of openings. |
| Building Technology Fee | $15.00 | A $15.00 technology fee attaches to each permit type; a replacement is a building permit. |
| Windows/Doors all-in | $90.00 | $75.00 + $15.00 - exact arithmetic from the two schedule lines above. |
| New-construction plan submittal | $60.00 (not stated) | Printed for new residential construction; the schedule does not state it attaches to a flat replacement line - not added ($150.00 if it did). |
| New opening / structural change | $200.00 line | Cutting in a new opening, widening a window, or header work can move the job to the "Repairs & Alterations" $200.00 line - a department call. |
| State / city percentage levy | None | Texas has no statewide permit levy; Waco adds no percentage surcharge on this line. |
Source: City of Waco Development Services - Inspection Services Permit Fee Schedule (live page, no printed effective date; codified in Waco Code of Ordinances Chapter 6). The plan-submittal and structural rows are shown to disclose amounts this schedule does not resolve for a like-for-like replacement, not to add a fee - confirm both with Inspection Services.
Worked Examples - Real Window & Door Projects in Waco
Because the Windows/Doors permit is a flat fee, the permit cost does not change with the number of openings. What can change the total is cutting in a new opening or bundling other work. Figures are from the City of Waco Development Services Permit Fee Schedule.
A homeowner replaces three aging windows with new units in the same openings - no framing change.
- Windows/Doors permit: $75.00
- Building Technology Fee: $15.00
- Texas state levy: $0.00 (none)
- Permit: $90.00
The same $90.00 would apply to a single window or to every window in the house - the $75.00 line is flat, not per opening.
A homeowner replaces 14 windows and two exterior doors, all in existing openings.
- Windows/Doors permit: $75.00
- Building Technology Fee: $15.00
- Still one flat permit: $90.00
Waco's flat line is a real advantage on large jobs. A per-opening city can cost more; confirm current fees with Inspection Services.
A homeowner cuts in a new exterior door opening in a load-bearing wall, which requires a new header.
- Flat Windows/Doors line (if it still qualifies): $75.00 + $15.00
- Repairs & Alterations line (if reclassified): $200.00 + $15.00
- Depends on department call: $90.00 or $215.00
Whether cutting a new opening stays on the flat line or moves to the $200.00 Repairs & Alterations line is a determination for Inspection Services. This guide does not assume the reclassification.
When This Estimate May Not Apply
The $90.00 covers the flat Windows/Doors permit on Waco's Development Services schedule. Route your project to Waco Inspection Services before relying on this figure if any of the following applies:
- You are creating or resizing an opening. Cutting in a new window/door or widening an existing one, especially in a load-bearing wall, can reclassify the job to the $200.00 Repairs & Alterations line - a department determination.
- Plan submittal may apply. The $60.00 Non-Refundable Residential Plan Submittal Fee is described for new construction; the schedule does not state it attaches to a flat replacement. If it did, the total would be $150.00 - confirm with Inspection Services.
- You bundle other exterior work. Siding is a separate $75.00 line and roofing a separate $125.00 line, each with its own $15.00 tech fee.
- Impact or utility fees apply. Impact, water, and wastewater tap fees are on separate schedules and are not part of this permit.
- Work starts without a permit. Waco's schedule doubles the fees as a penalty for work commenced before the permit is issued.
- The schedule is updated. Waco's live schedule prints no explicit effective date. Fees can be amended; confirm the current amount before filing.
New-opening reclassification, plan submittal, bundled siding/roof work, and impact/utility fees are excluded from the $90.00 windows/doors permit on this page, and the page-standard disclaimer applies - always verify with Waco Inspection Services before budgeting.
Waco Window/Door Permit vs a Per-Opening Texas City
Texas cities price window and door replacement on two different models: a single flat line (Waco) or a per-opening fee (Mesquite). The basis matters more than the headline number - a per-opening city is cheaper for one window and can be more expensive for a whole house. Both figures below are exact from each city's schedule; scope differs, so each note gives the basis.
| City | Fee Basis | Permit Fee |
|---|---|---|
| Waco, TX | Flat line + $15 tech ($90 all-in) | $75.00 flat |
| Mesquite, TX | $30 first opening + $30 each, $100 max | $30.00-$100.00 |
Scope note: Waco's $75.00 (plus $15 tech) is flat for any number of openings. Mesquite (Residential Fee Schedule, Revised February 2022) charges $30 for the first opening and $30 for each additional, capped at $100 - so one window is $30 in Mesquite versus a $75 flat line in Waco, while a large multi-window job reaches Mesquite's $100 cap and stays flat in Waco. Confirm current figures with each department; Mesquite's schedule is more than four years old.
See Waco's full residential fee schedule, or price related exterior work.
Frequently Asked Questions
Who to Contact
| Department | City of Waco - Development Services (Inspection Services) |
| Location | City of Waco, McLennan County, Texas (Central Texas) |
| Fee schedule | City of Waco Permit Fee Schedules (Development Services) |
Sources
-
City of Waco Permit Fee Schedules (Development Services - Inspection Services) City of Waco official live fee-schedule page. Primary source for the $75.00 Windows/Doors line, the $15.00 building Technology Fee, the $200.00 Repairs & Alterations line, and the $60.00 new-construction plan submittal fee. Read August 26, 2026 exact - live schedule, no printed effective date
-
City of Mesquite Residential Fee Schedule (Revised 02/22) City of Mesquite official residential fee schedule. Source for the per-opening comparison ($30 first opening + $30 each, $100 max). Revised February 2022 (more than four years old). Verified August 2026.
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified August 2026.