Skip to main content

Roof Replacement Permit Cost in Beaumont, TX (2026)

Roof replacement (re-roof) permit fees for the City of Beaumont, Texas (Jefferson County), pulled directly from the city's Residential Building Permit Fee Schedule that took effect October 1, 2024. The schedule charges roofing at $0.10 per square foot of roof area - about $200 for a 2,000 sq ft roof. The schedule's unit is the square foot, not the roofing "square" (100 sq ft) that contractors quote, so $0.10 per square foot works out to $10.00 per roofing square. Texas has no statewide permit levy. Two other lines on the same schedule can change your out-the-door cost - a $55.00 minimum permit fee and a $10.00 usage fee - and the schedule does not state how either applies to a re-roof. Both are spelled out below rather than folded silently into the headline number.

Roofing Rate
$0.10 per square foot of roof area
Minimum Permit Fee
$55.00 - may control on small roofs
Usage Fee
$10.00 - per-project vs per-permit basis not stated
State / City Percentage Levy
None (Texas has no state levy)
MEP Trades
Priced separately, not in the roofing line
Fee Schedule Effective
Effective Oct 1, 2024 - verify current
What This Guide Covers - and What It Does Not

This guide covers: The City of Beaumont, Texas (Jefferson County) residential roofing permit fee as printed in the Residential Building Permit Fee Schedule effective October 1, 2024 - $0.10 per square foot of roof area. That rate is exact from the published schedule. A 2,000 sq ft roof is 2,000 × $0.10 = $200.00.

Unit note - square foot, not roofing "square": Roofers price by the "square," which is 100 square feet. The Beaumont schedule's unit is the square foot, so $0.10 per square foot equals $10.00 per roofing square. Use the roof's total square footage, not the number of squares, when you apply the rate.

Disclosed ambiguity - the $55.00 minimum permit fee: The same schedule prints a $55.00 minimum permit fee. On a small roof section where the per-square-foot roofing fee falls below $55.00, the $55.00 floor could control and make the effective permit $55.00. The schedule does not state how the roofing line and the $55.00 minimum interact. We publish the $0.10 per square foot rate and disclose the minimum rather than silently resolving it. Confirm which applies with the Building Codes division before budgeting.

Disclosed ambiguity - the $10.00 usage fee: A $10.00 usage fee is listed on the residential schedule. The schedule does not state whether it is charged once per project or once per permit, so it is not folded into the headline figure. If it applies, add $10.00.

Residential plan review is not folded in: The schedule prints a $150.00 residential plan review fee, but it is written for new residential construction and the schedule does not state that it applies to a standalone re-roof. It is therefore excluded here and not added to the roofing fee.

This guide does NOT cover: Roofing material and labor costs; structural or decking repair engineering; tear-off, disposal, or underlayment costs; HOA approvals; MEP (mechanical, electrical, plumbing) trade permits, which are separate; a roofing or contractor's bond, whose amount is not on the schedule; and water and sewer tap fees, which are separate. Permit timelines and inspection scheduling are also outside this line - confirm the process with the department.

Key Takeaways
  • Beaumont, Texas charges roofing at $0.10 per square foot of roof area on its Residential Building Permit Fee Schedule effective October 1, 2024. A 2,000 sq ft roof is about $200.00.
  • The schedule's unit is the square foot, not the roofing "square" contractors quote. Since a square is 100 sq ft, $0.10 per square foot equals $10.00 per roofing square - apply the rate to the roof's full square footage.
  • Unresolved on the schedule: a $55.00 minimum permit fee is printed alongside the roofing line, and on a small roof section where the roofing fee is below $55.00, the effective fee could be $55.00. The schedule does not say which controls - verify with Building Codes.
  • A separate $10.00 usage fee is listed, with no statement of whether it is per project or per permit. It is disclosed here, not folded into the roofing rate.
  • Texas has no statewide percentage permit levy - unlike Virginia's 2% USBC add-on - and Beaumont adds no city percentage surcharge on the roofing permit. MEP trade permits and a contractor bond are separate.
  • The figures come from the City of Beaumont schedule effective October 1, 2024. Confirm current amounts with the Building Codes division before filing. For a Texas contrast, see the New Braunfels roof permit guide and the Beaumont fence permit guide.

Beaumont Roof Permit Fee Structure

The residential roofing permit is a per-square-foot line - $0.10 for every square foot of roof area. There is no valuation calculation, no technology surcharge, and no statewide levy. Two lines on the schedule can still move the total - the $55.00 minimum permit fee and the $10.00 usage fee - and both are shown in the table below exactly as printed, along with the item the schedule leaves unresolved.

Item Fee How It Is Calculated
Residential roofing permit $0.10 / sq ft Per square foot of roof area on the residential permits table. Unit is the square foot, not the 100 sq ft roofing "square". A 2,000 sq ft roof = $200.00.
Minimum permit fee $55.00 General minimum for a permit. On a small roof where the per-square-foot fee is below $55.00, the effective fee may be lifted to $55.00. The schedule does not state how the two interact - verify with the department.
Usage fee $10.00 Listed on the residential schedule. The schedule does not state whether it is per project or per permit, so it is disclosed, not folded into the roofing rate.
Residential plan review $150.00 Written for new residential construction. Not stated to apply to a standalone re-roof, so excluded here.
State / city percentage levy None Texas has no statewide permit levy; Beaumont adds no percentage surcharge.
Work started without a permit $500.00 penalty Flat penalty for working without a permit, printed on the residential schedule.

Source: City of Beaumont (TX) Residential Building Permit Fee Schedule, effective October 1, 2024. The $0.10 per square foot roofing rate, the $55.00 minimum permit fee, the $10.00 usage fee, the $150.00 residential plan review, and the $500.00 unpermitted-work penalty all appear on the city schedule. The schedule does not state how the roofing line and the $55.00 minimum interact, nor whether the usage fee is per project or per permit - confirm the amounts that apply to your application with the Building Codes division.

Worked Examples - Real Roof Projects in Beaumont

The roofing permit scales at $0.10 per square foot of roof area, so the permit cost rises with roof size. Every figure below is direct arithmetic from the published rate. The only complication is the $55.00 minimum on a very small roof and the $10.00 usage fee, which the schedule leaves unresolved - both are labelled where they matter.

Example 1: 1,500 sq ft roof re-roof

A Beaumont homeowner re-roofs a 1,500 sq ft roof.

  • Roofing permit: 1,500 sq ft × $0.10 = $150.00
  • Texas state levy: $0.00 (none)
  • Roofing line: $150.00

$150.00 is above the $55.00 minimum, so the minimum does not control. If the $10.00 usage fee applies, add $10.00 for a total of $160.00. The schedule does not settle whether the usage fee applies; confirm before budgeting.

Example 2: 2,500 sq ft roof re-roof

A larger home re-roofs a 2,500 sq ft roof - more area, so a higher per-square-foot total.

  • Roofing permit: 2,500 sq ft × $0.10 = $250.00
  • Per-square-foot rate: $0.10 (same rate at any size)
  • Roofing line: $250.00

Well above the $55.00 minimum, so the minimum is not in play. The same $10.00 usage-fee caveat applies - if charged, the total is $260.00. Material and labor costs of the roof itself are separate and are not permit fees.

Example 3: Small 500 sq ft roof section - the $55.00 minimum boundary

This example shows where the $55.00 minimum can control, so a homeowner is not surprised at the counter.

  • Roofing permit: 500 sq ft × $0.10 = $50.00
  • Minimum permit fee (if it controls): $55.00
  • Effective fee may be lifted to: $55.00

This is a labelled boundary case. The arithmetic gives $50.00, which is below the $55.00 minimum, so the effective fee may be lifted to $55.00. Because the schedule does not reconcile the roofing line and the minimum, the Building Codes division is the authority on which figure lands on your permit. A $10.00 usage fee, if it applies, would be on top.

When This Estimate May Not Apply

The $0.10 per square foot rate covers the residential roofing permit line as printed on the Beaumont schedule. Route your project to the Building Codes division before relying on these figures if any of the following applies:

  • Your roof section is small enough that the $55.00 minimum permit fee applies. The schedule prints both the $0.10 per square foot roofing line and a $55.00 minimum, and where the roofing fee is below the minimum, the effective fee could be $55.00. This is the single largest open question on small jobs - confirm it with the department.
  • The $10.00 usage fee is charged. The schedule lists it without stating whether it is per project or per permit. If it applies, add $10.00.
  • Your project includes structural or decking work. Repairs to rafters, trusses, or roof decking may trigger additional review or fees beyond the flat roofing rate - confirm scope with the department.
  • Your project includes trade work. MEP (mechanical, electrical, plumbing) trade permits - for example rewiring for solar-ready or attic ventilation - are permitted and charged separately under the MEP fee schedule.
  • A contractor or roofing bond is required. Contractor bonds are separate forms with amounts not stated on the fee schedule.
  • You started work without a permit. The schedule states a $500.00 penalty for work performed without a permit.
  • The schedule is amended. These fees took effect October 1, 2024 and can be amended - confirm current amounts before filing.

Roofing material and labor costs, tear-off and disposal, HOA approvals, and inspection timelines are excluded from the roofing-permit figures on this page, and the page-standard disclaimer applies - always verify with the Beaumont Building Codes division before budgeting.

Beaumont Roof Permit Cost vs Other Verified Texas Cities

Texas cities price roof permits differently - some by the square foot, some as a flat fee. Scope and basis differ, so each figure below notes how it is charged. Verify with each department before relying on any number.

City Roof Fee Basis Residential Roof Permit
Beaumont, TX Per square foot; $55 minimum + $10 usage fee unresolved $0.10 / sq ft (~$200 for 2,000 sq ft)
New Braunfels, TX Flat building line $75.00 flat
Tyler, TX Flat re-roof permit $100.00 flat
Waco, TX Flat roof permit $140.00

Scope note: Beaumont charges $0.10 per square foot, so the total depends on roof size - about $200.00 for a 2,000 sq ft roof - with a $55.00 minimum and a $10.00 usage fee left unresolved on the same schedule. New Braunfels, Tyler, and Waco use flat fees that do not scale with roof area, so a small roof can cost more in those cities and a large roof can cost more in Beaumont. Compare the basis, not just the number, and confirm current figures with each department.

Next Step

See Beaumont's full residential fee schedule, or compare roof permits in other Texas cities.

Frequently Asked Questions

The residential roofing permit is charged at $0.10 per square foot of roof area on the City of Beaumont schedule effective October 1, 2024. For a 2,000 sq ft roof that works out to about $200.00. However, the schedule also prints a $55.00 minimum permit fee, so on a small roof section where the roofing fee is below $55.00, the effective fee may be $55.00. A $10.00 usage fee may also apply. Confirm the figure that applies to your permit with the Building Codes division.
Per square foot. The Beaumont schedule's unit is the square foot of roof area, not the roofing "square" that contractors quote. A roofing square is 100 square feet, so $0.10 per square foot equals $10.00 per roofing square. When you apply the rate, use the roof's total square footage - for a 2,000 sq ft roof, 2,000 × $0.10 = $200.00, which is the same as 20 squares × $10.00.
It can control on a small roof. At $0.10 per square foot, any roof area under 550 sq ft produces a roofing fee below $55.00 - for example a 500 sq ft section is 500 × $0.10 = $50.00. Because that is below the $55.00 minimum, the effective fee may be lifted to $55.00. The schedule does not state how the roofing line and the minimum interact, so we disclose it rather than resolve it. On a full 2,000 sq ft roof ($200.00) the minimum does not come into play. Ask the Building Codes division which applies.
The schedule lists a $10.00 usage fee but does not state whether it is charged once per project or once per permit, so we do not fold it into the $0.10 per square foot rate. If it applies to your roof permit, add $10.00 - for a 2,000 sq ft roof that would take the total from about $200.00 to about $210.00. Confirm with the department.
The $150.00 residential plan review fee is written for new residential construction, and the schedule does not state that it applies to a standalone re-roof. We exclude it from the roofing figures here rather than add it. If your roof work is part of a larger project that triggers plan review, confirm with the Building Codes division whether the $150.00 applies.
The city's residential permit schedule prints a roofing line at $0.10 per square foot, which indicates a re-roof is a permitted activity. The schedule also states a $500.00 penalty for work performed without a permit, so getting the permit issued before work starts matters. Trade permits, contractor bonds, and water and sewer tap fees are all separate charges outside the roofing line. Confirm the exact application process with the Building Codes division.
The Beaumont fee schedule states a $500.00 penalty for work performed without a permit. On a typical roof that is more than twice the roofing permit itself, so pulling the permit before construction starts is well worth it. You can price other project types with the permit fee calculator.
They are from the City of Beaumont, Texas Residential Building Permit Fee Schedule that took effect October 1, 2024, published by the Building Codes division. That is roughly 21 months before this guide, so the schedule is current but not brand new - confirm the latest adopted amounts with the department before filing. See all Beaumont permit fees and all Texas cities.

Who to Contact

Department City of Beaumont, Texas - Building Codes division (801 Main Street, Suite 201, Beaumont, TX 77701)
County Jefferson County, Texas
Phone / Email 409-880-3100 / Building_Codes@beaumonttexas.gov
Ask them Whether the $55.00 minimum applies to a small roof section, and whether the $10.00 usage fee is charged on a re-roof permit
Fee schedule City of Beaumont Residential Building Permit Fee Schedule (eff. Oct 1, 2024)

Sources

Official Sources - Recorded July 2026
  • City of Beaumont, TX - Residential Building Permit Fee Schedule 2024 Beaumont, TX (Jefferson County) - official city fee schedule on beaumonttexas.gov. Primary source for the $0.10 per square foot roofing rate, the $55.00 minimum permit fee, the $10.00 usage fee, the $150.00 residential plan review, and the $500.00 penalty for unpermitted work. Effective October 1, 2024; recorded July 2026 eff. Oct 1, 2024 - verify current
  • Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified July 2026.
Always verify current roof permit fees directly with the City of Beaumont (TX) Building Codes division before budgeting or filing. The figures on this page come from the city's Residential Building Permit Fee Schedule effective October 1, 2024. The schedule charges roofing at $0.10 per square foot of roof area, and separately prints a $55.00 minimum permit fee and a $10.00 usage fee, without stating how the minimum interacts with the roofing line or whether the usage fee is per project or per permit. Ask the Building Codes division which figures apply to your application before submitting.
Disclaimer: All fee information on PermitPrice is for informational purposes only and is not an official permit quotation. Actual permit fees are determined by the City of Beaumont, Texas Building Codes division at the time of application. The $0.10 per square foot roofing rate, the $55.00 minimum permit fee, the $10.00 usage fee, the $150.00 residential plan review, and the $500.00 penalty for unpermitted work are exact as printed on the city's Residential Building Permit Fee Schedule effective October 1, 2024. The schedule's roofing unit is the square foot, not the roofing "square" (100 sq ft). The schedule does not state how the roofing line and the $55.00 minimum interact, nor whether the usage fee is per project or per permit, and those ambiguities are unresolved. The $150.00 residential plan review is written for new construction and is not stated to apply to a re-roof, so it is excluded here. MEP trade permits, contractor and roofing bonds, and water and sewer tap fees are separate and excluded. Roofing material and labor costs, tear-off and disposal, structural repairs, and HOA approvals are excluded from the roofing-permit figures on this page. Verify all fees directly with the department before filing.

Written by: Munib Ur Rehman

Data verified against official fee schedule documents.